Immersion Chiller Series for Oil and Emulsion
- It is not necessary to install the chiller separately, because of cooling the oil and coolant simultaneously.
- An agitator is used to increase the heat transfer efficiency of coolant and SUS304 is applied to the evaporator coil and frame.
- The control panel is protected by IP54, and the control panel cooler with small power consumption is applied to protect the electronic parts.
- Intelligent controller, injection kit. micro high efficiency condenser coil and EC fan maximize system stability and efficiency.
- Condenser circulating air passage has a grease filter to minimize oil dust and foreign matter inflow.
- Control Panel: *Optional by the orderer **For general sale
|Compressor Capacity||kW(HP)||2.20 (3.0)||3.0 (4.0)||3.75 (5.0)|
|Agitator Capacity||kW(HP)||0.12 (0.16)||0.12 (0.16)||0.12 (0.16)|
|15*C coolant||20°C oil||4.800 / 3.200 (3.940 / 2.620)||6.380 / 4.250 (5.368 / 3.570)||7.990 / 5.320 (6.690 / 4.460)|
|20°C coolant||25°C oil||5,230 / 3.490 (4.290 / 2.860)||6.960 / 4.640 (5.850 / 3.900)||8.720 / 5.810 (7.300 / 4.860)|
|Coolant minimum hight||mm||200|
|mm||730(740) x 730(740)|
|Power Source||PH x V x Hz||3상. 380V. 440V. 460V. 50/60HZ|
|Dimension||(L1.2.3 X W X H1.2.3) _||787, 838, 923 x 787 x 1360. 1250. 445|
- This product is subject to change without prior notice due to technical development.
- Oil viscosity ISO VG32, ambient operation temperature 5 to 45°C, oil service temperature 5 to 50°C